Now that Christmas is almost here, you'll hopefully be looking to start winding up for the year. Whether you're only closing for that one day or you're making the most of it and taking a good week off we want you to be safe in the knowledge that your Mimaki printer will be fine again on your return!

The following methods have been advised by Mimaki directly, should you have any questions at all, please don't hesitate to get in touch.

Check your ink stocks to make sure it doesn't run dry while you're away. It won't need much but if in doubt give us a call, we've got great deals on ink in the lead up to Christmas to allow you to keep your shelves stocked!

Mimaki JFX200 / JFX500

Perform daily care (clean wiper area, replace wiper, clean metal plate, carriage, replace filter etc), ensure no direct sunlight in room, set room heating to 22 - 24°C, empty waste tank, ensure sufficient ink supplies. Printer settings (inkset CMYKW): Refresh level 3, auto cleaning off, auto maintenance - refresh level 1, cleaning level 1, firmware JFX500 - 2.20, JFX200 - 1.51

Mimaki UJV-160

Perform one normal clean and check test draw, repeat cleaning if necessary. Perform all daily cleaning, switch off at front switch, leave main power switch on, and cover the head carriage with the black cover provided.

Mimaki UJF-3042 / UJF-6042

Perform one normal clean and check test draw, repeat cleaning if necessary. Perform all daily cleaning including 10 minute nozzle wash, switch off at front switch, leave main power switch on. The UJF must be kept in an environment of 15°c or more, falling below this temperature could be harmful for the printer.

Mimaki JFX / JFXplus Series

Perform one normal clean and check test draw, repeat cleaning if necessary. Perform all daily cleaning, switch off at front switch, leave main power switch on.

NB: For all UV machines using white - perform white maintenance upon restart if machine has been switched off for over two weeks.

Solvent machines

Perform one normal clean and check test draw, repeat cleaning if necessary. Perform daily maintenance, replace wiper if necessary. Make sure the ink cartridges and cleaning cartridge have a sufficient amount in them. Perform custody wash, following the instructions in the operation manual. When prompted for ‘leaving time’, select the default of 1 minute.

At the end of the custody wash power off at the mains. If using white and it’s been off for over 2 weeks, perform white maintenance level 1.

 

Again, should you have any questions at all, please don't hesitate to call us on +44(0)1420 511539.

From the whole team at printMAX we wish you a very Merry Christmas and a happy New Year!